2 Sections Articulated LED Work Light for A1 Mini

Version 2 of the LED work light arm, this time with 2 sections for more height and even more positions.

 

*** If you've printed the previous model, you can skip printing the base the the light bar and print just the new arms.***

 

Put your lighting in front, not behind!

An “ESSENTIAL” for printing Black color TPU or PETG!

A fully adjustable Work Light style of lighting mount for your LED strip.

It also function as a work light for nozzle swap or hot end repair.

 

I was printing a lot of models in black, especially black TPU filament, and every time, I want to check on the model's surface, I have to bring in another light even though I already have this strip lighting installed. The position of the light is just not optimal.

This model will work with either Biqu's LED Strip Light OR Panda Lux OR the other no brand LED strip light as I made the fitting for the strip very wide.

 

The work light is meant to be taped by using a double sided tape onto the printer, as to where exactly, it's up to you. If you have drawers on top of the printer body on the right, you can tape it on top of the drawer; if you want it to be taller up, you can tape it on the face of the side of the camera body :)

 

If you print very tall model, just don't the lock knob too tight. that way, it'll be pushed away when the plate with the tall print moves out when printing is complete.

 

This model is build specifically for the A1 mini, if you have the big A1, please refer to my other model that is made specifically for the A1.

LINK

Like always, if there's any modification needed to fit your LED, please let me know. I'll try my best to help out.

 

Boost MeThanks for giving me a boost! I Appreciates it very much!