Pool Inlet Curve Nozzle – 32 mm Hose Adapter

This 3D-printable curved nozzle is designed to connect to 32 mm inlets on above-ground pools and helps redirect water flow from your pump more effectively.

The angled shape improves internal water circulation, reducing dead zones and promoting better filtration performance.

🔧 Technical Specifications

• Compatibility: pools with standard 32 mm inlets (Intex and similar)
• Connection: friction fit, designed for a tight and stable hold
• Curve angle: approx. 80° – directs flow sideways or downward
• Recommended materials: PETG, ASA, ABS (resistant to heat, chlorine, and UV)
• Use case: improves water distribution and flow direction inside the pool
• Optional seal: use PTFE tape or silicone for better sealing

🛠️ Print Profile Description

Printed using:

• Printer: Bambu Lab A1 Mini
• Profile: 0.28 mm Extra Draft (Standard)
• Nozzle: 0.4 mm
• Material: Bambu Lab PETG HF
• Supports: not required
• Infill: 15%
• Bed adhesion: brim or raft recommended
• Orientation: print vertically, with the curve opening facing upward

⚠️ Warning: To ensure a watertight result, use thick walls (at least 3 perimeters) and avoid under-extrusion.

❗ PLA is not recommended for outdoor or chlorinated-water use.

🚀 Boost Me – Call to Action

💧 Improve your pool’s flow with a simple curve!
Print this nozzle to redirect the inlet stream for better water circulation.
Leave a ❤️ if it helps and share your setup with the community!