Give your vehicle a personality all its own!
Introducing the Hitch-Prop, a fun, 3D-printable accessory that brings your tow hitch to life. This propeller is designed to catch the wind, spinning wildly as you drive down the road. It creates a captivating illusion, almost like it's powering your vehicle forward!
It's the perfect weekend project and a fantastic way to make your ride stand out.
Key Features:
- Wind-Powered Kinetic Art: No motors, no batteries. It's powered purely by the wind from your drive.
- Durable by Design: Engineered to be printed in materials like PETG, ASA, or ABS to withstand UV rays, rain, and road grime.
- Secure & Simple Assembly: The bracket and retaining ring are designed to be securely locked in place with a single M4 screw.
- Optimized for Smoothness: Add a dab of grease to the shaft for ultra-smooth, high-RPM spinning!
Printing & Assembly Instructions (Crucial for 3D Models):
Before You Print the Full Set: Read This!
To save you time and filament, please follow these steps:
- Print a Test Fit First: Before committing to the full print, please print the "Mating_Test" and "Shaft" files.
- Check Your Tolerances: This test will help you dial in your support settings and ensure the parts have a perfect, smooth-spinning fit.
Printing Recommendations:
- Material: PETG is highly recommended for its excellent UV resistance and durability. ASA or outdoor-rated ABS are also great choices. (PLA is not recommended as it will warp in the sun).
- Supports: Supports will likely be needed for the shaft and propeller overhangs, depending on your printer's capabilities.
Assembly Guide:
- Clean any support material from your prints.
- For maximum performance, apply a small amount of lubricant (like synthetic grease or silicone lubricant) to the shaft.
- Secure the bracket and retaining ring to your hitch using one M4 screw.
- Mount the propeller and get ready to drive!
!! IMPORTANT NOTICES & CUSTOMIZATION !!
1. Safety & Legal Warning: Do Not Block Your License Plate!
- Before driving, you must ensure that the propeller does not obstruct your license plate in any way.
- It is your responsibility to check and comply with all local and state/provincial vehicle laws.
2. Need a Custom Fit?
- Does the standard bracket sit too high or too low for your vehicle?
- Just send me a private message! I am happy to design a custom-height bracket to ensure you get a perfect, and legal, fit for your specific car or truck.
Designmond
