Heat Insert Press (Hakko FX-888D adapter for Dremel Workstation 220)

Adapter for mounting Hakko FX-888D soldering iron in Dremel Workstation 220. The adapter mounts directly on the vertical steel rod of the workstation for maximum stability.

The thickness of the foam on the Hakko handles is not always exactly the same. In case of a loose fit you might have to add some tape.

Parts needed

• 2 pc. M3 heat insert diameter 4.6mm (e.g. Ruthex). 5 mm might also fit.
• 2 pc. M3x12 or M3x14 allen bolt.