Modular Pot Lid Organizer

I absolutely loved the original “Modular Pan Holder” so I remixed it into the Modular Pot Lid Holder. I tried a different pan lid holder and found it was finicky and not making our life easier. 

 

The are three models, Pot Lid Holder, Pot Lid Holder -5mm and DEEP Pot Lid Holder. The majority of lids will fit nicely in the standard version but if you have a lid with a deep lip on you will want to use the DEEP version for those. There is also a slim version that is 5mm slimmer than the standard Pot Lid Holder if you desire your lids to stand a bit straighter up. I recommend trying he standard version first then go from there. 

 

Each holder is connected by a bowtie. These bow ties are tapered on the top quarter of the connecter so make sure to note the orientation of the connector when pressing them together. Keep the build plate side down and you'll be set!

 

The print profile has 5 build plates so you can choose what you want to print for your specific needs.

 

NO SUPPORT REQUIRED

 

Thank you for your interest in this model!

Boost MeIf you find this model worked well for your situation please leave a boost if you so desire! Thanks!