Print in Place City Bus - Solaris Urbino 12

Boost MeMy models here are free. If you wish to reward me for my work, use this button so that more people can find and print this. Thank you, and happy printing. :)

This model of the 4th generation of Solaris Urbino bus comes with spinning wheels, working doors on the right side, a detailed interior based on the seating layout of a real bus, and can be printed entirely in one go with no supports needed. The model is split into two parts, both of which fit even on the A1 Mini buildplate, making this model truly accessible to everyone with a 3D printer.

An additional section of the bus can be purchased for a small fee on my Cults3D page here: https://cults3d.com/en/3d-model/game/print-in-place-articulated-city-bus-solaris-urbino-18

It will add an “accordion-like” bellows section (also fully Print-in-Place), which increases the the bus's manoeuvrability while increasing its passenger capacity, converting this Urbino 12 into an Urbino 18 bus.

This model is best printed at 100% scale, as all the clearances between moving parts have been carefully selected for that scale.

Despite the limitations of designing a vehicle with interior and working suspension and wheel mechanisms, I was able to preserve all the differentiating and iconic features of the vehicle. Some long bridges may be difficult if you struggle with print cooling, but otherwise, it's a pretty easy model to print. However, if you have issues printing any of my designs, DM me on Instagram (https://www.instagram.com/vit.budina/) and I will send you my Cura profile.

Enjoy! :D

Caution: Sharp Edges - Not suitable for children under 9 years due to breakable plastic. Adult supervision required.

Edit: Added spare wheels, in case the original ones break. Connect using filament, 2mm wire or a toothpick.