24× NeoPixel Holder for Wemos D1 Mini ESP32 (WLED)

A super clean 24-LED NeoPixel ring holder designed specifically for the Wemos D1 Mini ESP32. 

 

What fits inside?

- Wemos D1 Mini ESP32 (perfect for WLED)

- TTP23 touch button button on one side (for on/off or effect switching)

- SPH0645 Mic on the other side (ready for sound-reactive effects)

 

Setup is super simple:

1. Go to the WLED site

2. Connect your board and flash the latest WLED firmware

3. Set the touch button to “Push Inverted”

4. Enable the SPH0645 in the Usermod and assign the correct GPIO pins (check the WLED docs)

 

Assembly:

- The lid snaps in place and is secured with 2× M3 heat-set inserts + 2× M3×8 screws

- The lid holds the ESP32, microphone, and touch button securely – no glue needed inside

- The lid has a snap-in USB-C power jack

- Attach the NeoPixel ring with a little double-sided tape or glue

 

Christmas tree toppers included:

Two versions are in the files so you can use this ring as a real Christmas tree topper:

- Simple tree topper

- Star-shaped tree topper

 

Perfect as a glowing, sound-reactive tree topper or cool mood light all year round! Happy printing and happy flashing!

 

Boost MeThanks for the Boost!