P2S QR Code for Biqu Glacier Plate

This is a clip on QR code for Biqu Glacier build plates - designed for the P2S.

The QR codes that come with the plate do not work on the P2S, causing a “build plate not recognized” message.

To avoid having to keep clicking on “ignore and continue” or disable plate recognition, you can print these clips, and attach them to your Biqu Glacier Plate.

Clips are provided for all four build plate type - Textured, Smooth/High Temp, Cool and Engineering. Just print the ones you want to use.

Each clip takes about 20 minutes to print.

I recommend using black and white PETG. PLA will likely melt due to the build plate temperature.

I have also printed in Bambu PC, which holds up nicely on high temperature prints.

 

New: Increased the size of the cut out to avoid the calibration print better.

New: Added new Build profile for improved QR Code recognition.

New: Removed the original QR codes, just the improved ones are available now (some of the pictures are the old QR codes, but the clip is the same).

New: 23/1/2026 - removed all variants, and uploaded new models. These have a bigger cut out (as requested), and a slightly better fit on the plate.

 

Check out my clips for 3rd party build plates here: https://makerworld.com/en/models/2124833-p2s-qr-code-clips-for-3rd-party-build-plates

Boost MeIf these clips work for you