WLED Addressable Floor Lamp

I have created a WLED Floor Lamp model, this floor lamp has plenty of space in the base to add approx 1Kg of Sand in a bag to weigh the base down and make the lamp sturdy.

I have made using the following components in addition to the 3D Printed Components

1Kg Bag of Sand or Cement
WLED Controller: https://www.aliexpress.com/item/1005009393911688.html

Square V Shaped Corner LED Aluminium Profile: https://www.amazon.co.uk/dp/B01MZYKT5X

WS2814 LED Strip 5m : https://www.aliexpress.com/item/1005005366597212.html

12-24V Threaded Connector Socket https://www.ebay.co.uk/itm/296018915025 

24v 1.5A or 12v 3A PSU

WLED Screws into the inside of the base with M2.5 x 8mm screws.
 

Base Bottom Screws into LED Base with 4x 2.5 x 15mm Self Tapping Wood Screws

I used additionally some hot glue to glue the end cap which is provided with the Aluminium profile into the end, and additionally i put a blob of hot glue in the middle where the two 1m aluminium profile meet. however you can make using a single 1m profile for a shorter solution.

From experience, Do not try and put hot glue into the section where the Internal connector inserts, the aluminium profiles will cool the glue too quickly before you can insert the internal connector.