Reinforced Loop: Extra-thick attachment point to ensure the keychain survives daily wear and tear on your keys, clothes or gear
Low Material Cost: The keychain uses approximately 4g of filament.
AMS: The keychain is designed to be printed using an AMS
NO AMS: You can also print this without an AMS by adding a pause in your slicer at Layer 9. When the printer pauses, simply swap your filament and resume!
Recommended Print Settings
Nozzle: 0.4mm (Standard) or 0.2mm (for ultra-sharp text).
Layer Height: 0.16mm or 0.20mm.
Wall Loops: 2 (Higher number recommended for loop strength).
LoopForm
