Resko24 MK2 is a professional-grade enclosure designed for the YoRadio project. It combines retro-modern aesthetics with smart engineering. The heart of the design is the L-Tray modular system—an internal frame that holds all electronics and slides into the housing like a drawer, making assembly and maintenance incredibly easy.
Software & Compatibility
Pure YoRadio: This build is designed to run on the standard, unmodified YoRadio firmware.
No Mods Needed: There is no need for complex code modifications or "fancy" workarounds. It works out-of-the-box with the standard libraries, making it perfect for both beginners and advanced users.
Robust & Solid Design
Heavy-Duty Construction: Extra-thick walls for superior durability and acoustic insulation.
Solid Mounting Pillars: Sturdy internal standoffs that won't snap when driving in screws.
Drill-Ready Front: The front panel is delivered solid/clean. This allows you to choose your own layout. Drilling for your specific encoders is safe and easy thanks to the reinforced walls.
Premium Finish: Features an internal pocket for 3mm Smoked Graphite Plexiglass (80 x 97 mm) for a sleek "black-out" look.
TECHNICAL SPECIFICATION (BOM)
Component
Specification
Details
Main Controller
ESP32-S3 (30-pin DevKit)
Standard YoRadio support.
Display
2.8" TFT LCD ST7789V
Module v1.1.
Speaker
Visaton FR8 (4 Ohm, 10/15W)
High-end 8cm (3.3") driver.
DAC Decoder
PCM5102 I2S 32-bit
3.5mm Jack + Dual RCA (L/R).
Amplifier
TPA3110D Class D 2x15W
Powered by 12V.
Remote Control
HX1838 IR Kit
17-button remote + receiver.
Power Supply
AC-DC 80W Dual Output
12V (6A) / 5V (1A).
AC Socket
C8 "Figure-8"
Cut-out: 21x12.4mm.
Print Layout & Performance
The project is organized into 3 Plates:
Plate 1: Main Housing (~8h 38m)
Plate 2: L-Tray (V309.84) (~6h 14m)
Plate 3: Accessories (Knobs & Feet) (~1h 27m)
Total Print Time: Approx. 16h 19m (Bambu Lab P1/X1).
Tested Filament:Sunlu PLA Matte Black (Standard 0.20mm profile).
KEY FEATURES / Kluczowe cechy:
[EN] Video Showcase: Check the attached video to see the radio in action :)
[PL] Prezentacja Wideo: Koniecznie obejrzyj załączony film, aby zobaczyć radio w akcji :)
[EN] Versatile Audio: Pre-cut for both 3.5mm Jack and RCA (L/R) outputs.
[PL] Wszechstronne Audio: Wycięcia pod Jack 3.5mm oraz dodatkowe RCA (L/R).
[PL] Opcjonalna Antena WiFi: Przygotowane miejsce na antenę zewnętrzną.
Creator’s Note & Assembly
[EN] I am a hobbyist and a layman. This project was built through passion and trial-and-error. For assembly, I used self-tapping mounting screws. The pillars are solid and can be drilled out to fit your hardware.
[PL] Projekt amatorski. Radio dziaÅ‚a na standardowym oprogramowaniu YoRadio bez żadnych modów. Do montażu użyÅ‚em różnych wkrÄ™tów. Solidne sÅ‚upki pozwalajÄ… na bezpieczne rozwiercanie.Â
Magneto
