SCX30 Tracks

The tracks themselves aren’t in the main 3mf print profile since the are printed with a different nozzle size. You can find them by selecting “download stls” from the drop down menu. There you will find them as their own project in 3mf format, or continue scrolling to find them as an stl.

This is a set of tracks designed for the Axial scx30. They are designed to work with all models with stock axles and steering knuckles. I have included 3 different track styles to suit different preferences and terrains. Also included are 3 different options for rear inner cog mounts for different axle angles, one that is clocked 5° clockwise, one that is clocked 5° counterclockwise, and one that is 0°. This system uses bearings everywhere to minimize drag, but I included files for printed rollers for those of you who would like to save a little money and don't mind printing replacements as needed. Depending on your setup, longer shocks or minor trimming may be needed (jeep shown has injora 25mm shocks). Due to the inherent drag of track systems, the stock motor and esc struggles. You may need to upgrade to brushless or a more powerful brushed setup (dual motor setup coming soon).

The hardware needed for assembly can be found on Amazon and are as followed:

8- 8mm ID x 12mm OD x 3.5mm W bearings

48- 2mm ID x 5mm OD x 2.3mm W bearings (or use included files for printed rollers)

48- m2 x 5mm screws

32- m2 x 8mm screws

2- m1.2 x 5mm screws