This is a practical, heavy-duty holder for SDS-Plus drill bits, designed to be carried on a keychain or carabiner. Perfect for tradespeople and DIY enthusiasts who need to keep their most-used bits or chisels accessible at all times without digging through a tool case.
Features:
- Standard Interface: Fully compatible with all SDS-Plus bits (10mm shank diameter).
- Secure Locking: Features a dedicated locking pin with a 4.4mm ball that fits perfectly into the bit's retention groove.
- Safety Sleeve: A sliding outer sleeve keeps the pins locked in place, preventing accidental release.
- Integrated Eyelet: A robust loop for easy attachment to carabiners or key rings.
Assembly Instructions:
- Insert the locking pins into the holes of the main inner body.
- Slide the outer sleeve over the main body.
- Secure the assembly by attaching a carabiner or key ring through the top eyelet.
How to Use (Operation):
- Inserting: Simply push the SDS-Plus bit into the holder until the pins click into the grooves.
- Releasing: 1. Rotate the drill bit 90 degrees (this moves the pins from the deep locking grooves to the shallow ramps). 2. Pull the bit out smoothly.
Recommended Print Settings:
- Material: PETG or ASA (for mechanical strength and slight flexibility).
- Layer Height: 0.15 mm – 0.20 mm (finer layers ensure smoother operation of the pin ramps).
- Infill: 25% minimum for structural integrity of the eyelet and walls.
oizopetr
