April 19, 2026
Description
This ergonomic stand was designed specifically for the reMarkable Paper Pro to make using the tablet more comfortable for writing, reading, sketching, and creative or artistic work.
The 15° tilt toward the user creates a more natural writing, drawing, and viewing angle. This helps reduce reflections from overhead lighting and other light sources and can slightly improve the perceived contrast of the display. The difference is especially noticeable during longer sessions, whether for notes, reading, sketches, or creative work.
A key design feature is the integrated 7 cm wide palm rest, which transitions smoothly and without height difference into the device support surface. This allows the hand to rest naturally and comfortably while writing or drawing.
To suit different usage scenarios, the stand is available in multiple Print Profiles:
---
The model shown in the photos was printed in Bambu Basic PLA Silver, which matches the reMarkable Paper Pro very well and gives the stand a clean, premium metallic look on the desk.
If you take the STLs from the STL/CAD section, please be sure to print the models with the back facing down and activate tree supports (on build plate only).
---
Because of the size of the first 4 print profiles are only possible on H2-Series printers.
For smaller printers with 256^3 mm print beds, please refer to the additional print profiles!
---
You can find other stands from my reMarkable Series here:
---
Disclaimer: Unofficial accessory for use with reMarkable devices. Not affiliated with, endorsed by, or sponsored by reMarkable AS. reMarkable is a trademark of its respective owner.
Boost MeIf you enjoy this model, your Boost is greatly appreciated.
License:
Standard Digital File License
calmar81
