Chisel Holder - French Cleat

Chisel or general purpose holder with 6 x .525" slots and French cleats. This is the same depth as the screw driver and saw holder I've posted to maintain consistency. As a result, each slot can hold multiple chisels. 

Uses hidden dovetails for a clean appearance. Fit requires light pressure. The print profile should produce a nice fit, but use a dab of glue on the dove tails if you feel the fit is too loose. Results do vary based on machine calibration. 

French cleat is .7" (17.8mm) deep. The French cleat must be deeper than this value (a typical 3/4" plywood is .72" thick and works well).