May 17, 2026
Description
Figure neko Gawr Gura from Hololive
I tested it with wet PETG, so yours should be better.
The figure is partially optimized for FDM printing, but there is still a chance of snapping some of the thinnest hair strands when removing supports. This does not significantly affect the overall look.
Troubleshooting: If supports are breaking, set Z-hop to 0.4mm min and use the 'Spiral' type in your extruder settings (as shown in the image).
License:
Standard Digital File License
DeViiiNe![Tako-chan balljoint figure [Ninomae Ina'nis][Hololive][HololiveEN] preview image](https://wsrv.3dprinterfiles.com/?url=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/7d/4d/77/23/de/20201015_140718small.jpg&w=292&h=219&fit=contain&cbg=white&n=-1&w=640&h=640&output=webp&q=100&n=40&default=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/7d/4d/77/23/de/20201015_140718small.jpg&w=292&h=219&fit=contain&cbg=white&n=-1 "Tako-chan balljoint figure [Ninomae Ina'nis][Hololive][HololiveEN] preview image")
