Insta360 Luna Ultra Vertical Grip

This is a simple grip to shoot the Insta360 Luna Ultra in vertical mode comfortably instead of holding it sideways to get effective 4K vertical resolution. I have designed a standard camera mount and bracket that you can pivot/adjust the angle of your grip accordingly. Also porting over the same grip design for the remote mount on the grip itself for easy Luna control. You will need your own thumbscrew and nut for the mount. I always give my projects a finishing touch by lightly sanding it and a spray of clear coat to protect it from the elements.

** All printers/filaments will print differently with slight variances. I find the best way to get this to fit perfectly is to slightly heat up the clip with a heat gun and then 'form' fitting it on the Luna Ultra. DO NOT over heat or you will permanently warp the print and could damage the Luna's outer shell.

** Use this at your own risk, I am not responsible for any damage (s)from misusing this kit.

** With any 3D printing project especially with different types of printers, you will likely have to do some post sanding and finishing, this is the norm.