AMS clip-on holder for Filament Dry Box Label

I've published a filament label tab / tag that you can print with filament information that you can attach to a 4L dry box storage container.

Link to that model: https://makerworld.com/en/models/395861

I wanted a way to keep the filament label with the spool when transferred to the AMS, instead trying to keep the container reserved for that spool. This also allows me to display and quickly know which filaments are currently in the AMS unit.

I've previously suggesting using a small piece of thin (1/24" x 1/2") double-sided tape on the inside top of the clip to firmly secure this to the AMS unit, but many have shared feedback it's not needed. I'm now likely to advise to try without any adhesive or to use the thinner single-sided adhesive foam sponge strip roll. I welcome additional feedback.

Update May-16-2024: Added additional plates to print profile including clips numbered 1 through 16 and a plain unnumbered clip.

Update Jan-01-2025: Added Multi AMS Alphanumeric clips set A1 though A4, B1 through B4, C1 through C4, and D1 through D4.