Vintage HomePod mini case/HomePod mini复古外壳

以1955年博朗发布的SK2收音机外形为原型进行的HomePod mini外壳设计。全部卡扣拼装，无需胶水。

你可以打印自己喜欢的配件安装在前面板上，前面板小孔开孔直径为2.8mm，深度为2mm。

防尘网为选配打印件，打印时，顶层与底层为0，你只要修改线宽和填充率进行打印。

The HomePod mini case design is based on the shape of the SK2 radio released by Braun in 1955. All assembled with snaps, no glue required.You can print your favorite accessories and install them on the front panel. The diameter of the front panel hole is 2.8mm and the depth is 2mm.The dust filter is an optional print. When printing, the top and bottom layers are 0. You only need to modify the line width and fill rate to print.