Posca 1M + 3M and 5M Marker Holder for IKEA SKADIS

This is a relatively simple but very clean and aesthetic design to hold POSCA Markers that slots into the IKEA SKADIS Pegboard! Its sleek and elegant and uses minimal materials (just about 30g for one holder of either size markers). Each holder is identical in width, with the 1M + 3M holding 8 POSCA Markers and the 5M holding 7. The design is made for easy access to all markers, seeing the color of each cap easily, and also a snug but not too tight fit for a solid but easy slot in and removal for each marker. Both models have all items equally spaced and built off the center of the model for the cleanest look.

1M and 3M markers have the same cap size, so they share a model. 5M is a separate model. The two models can be found in the 3mf file separately and on the same build plate as one for convenience!

Pics show what I printed on my A1 mini but the profile should be plug and play on any Bambu Labs Printer!

Note that the pegs are a bit tight to slide down onto the pegboard, this was at first an accident that I then decided to keep in order to keep the holder from moving around when removing markers. To get it off easily, simply push up from one edge, then the other, then pull out. Also note that these pegs require supports to print properly, hence them being enabled in the 3mf file.

If there is interest I am happy to upload a version without the pegboard hooks, but I am not sure how useful it would be. Comment if you want to see one!

This model is fully my own design aside from the pegs to attach to the pegboard, which I re-modeled after ones in this model: https://makerworld.com/en/models/29193?from=search#profileId-25619

I chose not to remix off of it as I had to completely remodel them since they were broken in CAD and I also had to modify the spacing as it was wrong and didn't fit the board properly. That said, I utilized the dimensions for a singular peg from the linked model in the end so I wanted to give credit where its due. Saved me breaking out the calipers for that as well.