Vault Box - Version 7

This design uses a mix of 3D printed parts, various lengths of 5mm dowels and a bearing. Everything can be printed without support material. Below is a list of all the non-printable parts:

• 5mm Metal Dowels - These can be purchased on Amazon or other websites in either kits with multiple sizes or packets of specific sizes. For this project you need:
  • Required
    • (6) 20mm x 5mm - NOTE: 6 dowels are required for the handle but size can vary. I used 20mm.
    • (2) 30mm x 5mm (Hinge)
    • (5) 40mm x 5mm (Gear axel)
• One Bearing - 65mm OD x 50mm ID x 7mm h bearing
  • Link to the bearings I used: https://www.amazon.com/gp/product/B09D2XDT95/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1
• Super glue, J-B Weld Steel Reinforced Epoxy
• Grease or other lubricant (Optional, but recommended)