August 14, 2024
Description
Project: Berserk 2.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 175.09x245mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Elegoo Red Transmission Distance: 4
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Jade White
Border Only Colors from here until the end.
At layer #18 (1.52mm) swap to Red for the rest.
License:
BY-NC
Dakiren
