Norse Valknut (Odin knot)

HueForge Project: Old Norse Valknut.- Odin- (knot of those fallen in battle). I rather enjoyed creating this one! So I hope you like it!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 125x175mm in size. I made a stand for this available on my profile. Check it out if you need a display. 

Filaments Used:

PLA Inland Black

PLA Inland Light Gray

PLA Inland Beige

PLA Inland White

This print uses 4 unique filaments. FEEL FREE TO USE YOUR OWN FILAMENT BRANDS. The end result will vary slightly with different brands and opacities, but it shouldn't be a significant difference if the colors are close to the same.

Swap Instructions: (if you do not have an AMS unit, just add a pause at the following layer numbers and swap to the respective color)

Start with Black

At layer #8 swap to Light Gray

At layer #14 swap to Beige

At layer #20 swap to White for the rest.

Please consider leaving a rating and a comment if you enjoyed this print! I greatly appreciate it! It helps me to know what prints people like and what I should create more of in the future! I hope you enjoy!