This is a set of TPU roof skids for your Arrma Kraton 6s.
Features
Protects your roof from scuffs and other damage
7mm tall
Tapered leading and trailing ends.
No protruding screw to grind down
Counterbore for button-head screw with 2.5mm extra depth
Uses standard M4 mounting hardware
M4x6mm button-head screw on top
M4 Hex Nut underneath
Supporting pieces underneath body are the same as top pieces
When the top pieces are worn down, swap them!
Looks Great!
Designed to be printed outside-down
You can use a textured build plate to fit your unique style!
Arrma logo on the top is printed on the sidewall so it is nice and smooth.
Assembly
Note: The default print profile consists of four pieces: two “Lefts” and two “Rights”.
The opposite type will be paired with each type underneath the body (e.g. left side of vehicle will have Left piece on top of the roof with two screws and a Right piece underneath it with two nuts).
Start by aligning the bottom piece underneath the body nearly towards the edge to avoid interfering with the stock roll tower.
See photo for suggested placement.
Use a body reamer to start holes through the body from the bottom using the holes in the skid a a guide. Ensure the distance between holes is 52mm.
Once you puncture through, continue reaming the holes from the top of the roof to get a cleaner hole on the outside
When the hole is just large enough for an M4 screw, carefully tighten down a Left piece on top of the roof with screws to a Right piece underneath it with nuts.
Repeat this with the Right piece on top paired with a Left piece underneath it.
ken830
