Umbreon in gold

Boost MeBoot this model if you like it

As usual you can resize this in X and Y

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 115x204.44mm in size

You may print at higher layer heights below the Min Depth of 1.2mm
The Max Depth is 3mm and the Actual Depth is 2.2mm

 

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA+ Sunlu Orange Transmission Distance: 5
    Silk PLA Overture Gold 

This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #15 (1.28mm) swap to Blue Gray
    At layer #17 (1.44mm) swap to Orange
    At layer #22 (1.84mm) swap to Gold for the rest.