Rugged box for 4x65mm tiny whoops v2

This is my second version of a rugged box for tiny whoops like meteor65 or HummigBird.

Compared to the previous version 'Rugged box for 4x65mm tiny whoops v1':

• I added the insert for the bottom of the box
• I added a logo and the insert on the lid
• battery holder (using the box limited to only 2 whoops).

The battery holder creates 2 compartments for spare material such as propellers and canopy. It is also easily removable to be able to use it as a battery holder during flight sessions.

Without the battery holder, like the 'Rugged box for 4x65mm tiny whoops v1', it can easily contain 4 whoops, but if you put them with the camera facing up, there is room for a fifth in the center with the camera facing down.

I divided the print beds so that you can quickly choose whether to print the stops in TPU or PLA.

You will need:

• M3x20 screws (6 pieces)

See my other models for FPV and whoop.