Glock 17/19 Trigger Guard Cover

This device clips over the trigger guard on Glock models 17 and 19 to prevent the trigger from being manipulated while still allowing for weapon mounted lights and lasersweapon-mounted. This device should not come in contact with the trigger in any way, however, your milage may vary depending on your print settings; use at your own risk. This device is functional in PLA however for longevity I would strongly recommend using a material such as PETG or ASA at a minimum. 

Features:

Lanyard hole - Use a piece of paracord or similarly strong cordage to attach a lanyard to the device. This is the primary method of removal of the device. Once the lanyard is fitted you can sharply pull down on the lanyard to remove the device. Additionally the lanyard can be clipped into a retention loop or carabiner inside a bag and then pulled against to remove the device. 

Horn - At the front of the device forward of the lanyard hole is a horn that allows the user's finger to press downward against the device. This is a backup removal option if the user chooses not to use the lanyard, or if the lanyard fails.