Foghorn Leghorn - Onepiece

Foghorn Leghorn, a cartoon character in the Looney Tunes and Merrie Melodies series of short films by Warner Bros. This is a onepiece version of Foghorn based on my multi-part Foghorn model that I've previously posted. Since I do not have an SLA printer, I teamed up with maker Kyler Stern to do the printing and painting. I converted my multi-part model to a onepiece model for SLA and FDM printing. Kyler then proceeded as follows: Foghorn: Decrease size from original to 3 Inches tallScale: X: 1.76, Y: 2.19, Z: 3.00 Inch = 59.63% of original sizePrinter: Anycubic Photon M3Resin: Anycubic Water-Wash Resin+ GreyLayer Thickness: 0.05 mmHollowed body. Print time: 5 hours Note: Something important to call out regarding print time. Kyler has his screen power set to 80% power. This increases print time significantly but extends screen life. This might be important for individuals going forward.   Other notes regarding the supplied STL file: For FDM and SLA printing, size the STL file as needed for your purpose and add Slicer supports. Enjoy!