Seilbahn / chairlift

Edit 12/2020:
long time no see!
I just edited some files, as you see on the ending "_V2"! Only these files are new, the rest did not change. I left the old files in for the reason of compatibility.

• The rope clamping "Seilklemme" is constructed to be used with a 1.5 mm rope. A 2 mm "SPAX" screw cuts into the rope to clamp it. The lower side now fits perfectly into the rolls. I used a 0.2 mm nozzle for printing, while the part is rotated 45 degrees so that I have no support material inside the part. If your printer has a 0.4 mm nozzle, just use the old part and a 2 mm rope!
• The maintanence podests "Wartungsplattform" are now more variable to different angles. just cut them to the needed length.
• The roll batteries "Rollenbatterie 2er" and the rolls are now cunstructed to use without the 2 mm pin pressed in.
• The lower part of the pylon is designed more detailed.
• The chairs are smaller for a better scale look.

I am still working on the perfect drive system! So there is still no complete gearbox uploaded...
######################################################
Modell einer 2er-Sesselbahn, noch nicht fertig konstruiert.
Manche Teile sind auf der XY-Ebene leicht verrundet, um ein besseres Druckergebnis bei meinem Drucker zu erreichen.
Als Achse für die Rollen werden 8mm Stifte eingeresst (bspw. DIN7 2m6x8)
Es darf gerne feedback gegeben werden. Wenn jemand ähnliche Projekte hat oder etwas ergänzen möchte, gerne her damit.

Model of a chairlift, still in the making. As axle for the rolls I use 2m6x8mm pins. Please let me know, if you have any similar projects or if you have created some additional parts.