Summary

This is for the metal framed fabrikator 2 mini printer available through hobbyking.

Mounts using two stock sized screws. Good luck with the wiring lol haven't figured that part out yet.

You should be able to mount and unmount the hotend without having to unscrew this mount.
I print it upside-down in PLA as I notice that the mess-up the support interface creates aids in making the mount more secure.

because I used stock e3d wire and routed it down the hole below the lowest z axis bearing... i'm having troubles so I added the _7mm_lower_v3.stl file. should work, still testing. ...wasn't enough, trying 9.5mm_lower_v3.stl

Print Settings

Rafts:

No

                                            <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>50%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>print in stock orientation with support.<br>PLA support interface roughness makes the mount work better in my experience.<br>May have to do some knife surgery with ABS, or print it up-side-down.</p></div>

Fabrikator II mini e3d mount

Fabrikator II mini e3d mount

Related Models