CoMoS - Comfort Monitoring Station

Case parts to build a Comfort Monitoring Station CoMoS. Find the whole story and instructions here: The main CoMoS case is assembled from three parts: case body, top, and bottom part. Optional: a small rectangle case and lid for a micro SD card reader is included in the files. It's meant for the stand-alone version of CoMoS. Please see the instructable for further info. Color selection of white filament for case body and top part, and transparent for bottom part is highly recommended to ensure the correct function. The case should not heat up too much in direct sunlight and the bottom part should allow LED illumination. Done in SketchUp, .skp files attached. The top and bottom parts are designed to press-fit the body part with -0.1 mm. However, depending on your printer setup and calibration, you might try printing the top and bottom part at 99 % for easier fit. As this is part of an ongoing research work and a PhD-project, please respect the CC Attribution License to acknowledge the authors' work. Thank you. Find out more and contact the author: