Dual 4010 fang for Tronxy X5S series

** please read first **

I have uploaded a different version of the dual 4010 fang, to the CR10 Fang assembly page (linked below). The reason why i did not do this for version, is because this version does not fit the CR10. The new version fits both the Tronxy and the Creality. Airflow is also directed right at the nozzle tip, but also at an angle towards the back, to push away warm air. The new version also has shorter tubes for better performance and more clearance. There is also a dual 5015 version there.

---

This is a dual 4010 fang. You can use the stock 4010 fan, and if you buy an aditional 4010, or have a spare (i used the one from my CR10) this fang setup might be for you! You mount it on this thing: https://www.thingiverse.com/thing:3349695

And you will additionally need the 40mm duct for the coolend from the CR10 version here: https://www.thingiverse.com/thing:2763931

You can also download other fangs in that last link, that will fit the mounting plate above. I did some tests, and it clearly does a better job than a single 4010 fang.

I printed this without supports in ABS (without cooling). So it is possible, but i printed it slowly. I think you could get away with supports here, because it is a fairly straight shaft. But this is just speculation.

This fang will NOT fit the CR10. I will probably make a version that does fit the CR10 in the coming weeks (since i intend to move the setup to my CR10, once my other fans arrive in the mail).

Added an EZABL mount, which is UNTESTED (i don't own one myself). Try and let me know.