Summary

So this key boke a few months ago, and since I have a flexible filament laying around, I gave it a try. It is very quickly to print, and thought it may take a few tries (at least with my printer and the filament I have), the final result is nice.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Prusa Mk2</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.30</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100</p></div></p>                                                    <strong>Filament:</strong> FFFWorld Elastic                Black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I printed with a 1 layer brim and 10 Outlines</p></div>

Post-Printing

Place, cut and glue

            <div><p>The part is a bit bigger than needed. Place the print in the hole, and check for the lenght. Make sure the key is not continuously pressed, and cut little by little till you get the correct length. Then, check the outline size. You will surely need to cut it down. Finally, I glued it with a few drops of Loctite Super Glue3, make sure it is evenly spread throughout the entire surface, to avoid liquids or dirt to go inside the machine.</p></div>                    <p class="detail-caption"><strong>The final piece. Needs some cleaning of the surroundings, I make a bit of a mess with the Loctite. </strong></p>            <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/f8/d8/c9/dd/b6/IMAG2105.jpg"></p>

Thermomix 35 Scale Key

Thermomix 35 Scale Key

Related Models