Prusa MK3s Y axis Camera with integrated light

[Edit 6/18/2019]: added the proper M6 thread to the part razer cam mount - 2.stl so that its ready to use after printing without additional tools

[Edit 3/16/2020]: added an M3 size nut cutout to the Y-Axis Mount part so that the screw can be securely tied from the plate to the mount.

Prusa MK3s Y axis camera mount with integrated light controllable from OctoPrint. You will need:

1. Tripod screw https://www.amazon.com/gp/product/B00R7AWP04/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00R7AWP04&linkCode=as2&tag=dmneo023-20&linkId=e8fc6b013760f78a1551777aa77a5e66
2. 3-4 M4x30 screws and nuts, depending on how long you want your arm to be and if you need the swivel or not on top (you can just print the mount, the arms, and the camera tripod mount if you want)
3. 1 M3x25 countersunk screw and nut, to fasten the Y Axis mount to the arm of the heatbead.
4. Razer Kiyo camera from Amazon https://www.amazon.com/gp/product/B00R7AWP04/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00R7AWP04&linkCode=as2&tag=dmneo023-20&linkId=e8fc6b013760f78a1551777aa77a5e66, which has an integrated light ring. I will explain below how to control the light and turn it on and off programatically before and after each print. It is fair to say this parts will fit any camera with a standard tripod support, therefore, if you do not care for the light feature of this setup, you should be able to get any other camera that fits your requirements.

Included Left (Y-Axis_Mount-Left.stl) and Right(Y-Axis_Mount-Right.stl) versions for your choosing on which side to place the camera arm. Make sure you print the right one, otherwise you could damage your Y Axis or the heatbead.