WebCam support for ender 5 plus

Hello all,

Here's an ajustable webCam support for Ender 5 plus ... or for all printers that has 2020 profil

All the parts can be printed without support except for part 7.
All the parts are printed mostly on the side edge so that the holes are horizontal.
The part 5 should be printed on the biggest flat part.

As you can see I used base plate to hold the Cam with two pieces of inner tube : that's not the better way to do it. Maybe I'll create a piece to hold the Cam.

You will need :
1M4x20 (hex head) + 1M4 washer + 1*M4 nut : Per articulation .
One more set for rotating articulation (Part 6 + Part 7)

2M4x10 (allen) + 2 T-Nut

The holes for the nut are tight : the nut have to be pressed in
The assembly for the rotating piece is tight too : sand paper helps

Baseplat can be used has Cam holder .