LapMonitor gantry for mini-z

This is a gantry to support LapMonitor lap counter above the Kyosho GP30 RCP track.
You need to print :
1x "support comptage.STL" (to put your lap counter on)
1x "loophole IR waveguide.STL" (dramatically improve the detection, espcialy on little track, best printed in black) design to have wide beam (90cm wide track) or narrow beam (60cm wide track)
4x "portique.STL"
8x "traverse.STL" (link between montant to improve rigidity)
4x "montant top short.STL" or 4x "montant top.STL" (short put your lap counter less higher)
4x "montant botom.STL"
2x "base portique.STL" (can be locked on the kyosho RCP track, see picture)

You need 24x Button head M3x8 and 8x Button head M3x10

Every thing can be print without support, take care of "montant top short.STL" "montant botom.STL" and "montant top.STL" when placing it on your slicer software, they have dropout.

todo : design "portique.STL" for GP30 with expansion (~90cm wide track) and other kind of wide track GP50 GP50 extanded RCP....)