Ratchet Wrench for 13mm Nylock Nuts

I made this in 3 parts. The handle and the middle. It is used on 13mm Nylock nuts because it has a lot of back resistance (depending on the material used). The half spanner needs to be printed and the mirror side superglued together. The Full spanner can be printed with tree supports and the middle piece bent into place (take care not to break the vanes.) Some lube can be used at first to assist in the ratchet mechanism (i used silicone lube). Take notice which way the outer ratchet pieces are facing:
Edit 14/4/21:: i have redesigned the centre bit..It can replace the original centre by levering out the old one and using care to insert the new one
https://youtu.be/zYLMkz-aEk4