Slatwall pegs or hooks

Update:
2021-09-17: Fixed the small_narrow peg... it wouldn't sit flat correctly on the bed. Which also reminds me, some of these models you'll have to sit them flat on the bed as required.

--

Please leave a comment if you liked it or any recommendations/questions, or any complaints. :)

These are various Slatwall hooks or pegs for tools etc. I have a "FastTrack" on my garage wall, but it should work on any slatwall, gearwall, Flowwall or other similar boards.

These can be stretched width wise to make them wider... which should be fine. Of course, you can't scale/stretch the height or length (how much it protrudes out of the wall) as it probably won't fit into the slotwall gap.

Also added the 'cleat' without any holder/hook attached to it; if you already have a tool holder and want to hang it onto the slatwall, you can print this and screw+glue. Speaking of screw + glue, a screw in it self would probably split the part. So I used a screw that would loosely fit into the printed part, but added epoxy on the screw for it to make it stronger. Also was printing with ABS so maybe won't have that problem with other materials?

Let me know either way if you have issues or success with these. They've lasted for me for a few years. Only downside is that they aren't 'locked' in. When I'm putting a tool back, I bump the pegs/hooks and sometimes they fall out of the slotwall. Maybe a 1 or 2% size increase may just make them fit in more tighter and not fall out? Haven't tried that...

I've also created some tool holders and I've uploaded those separately.