Watering hose guide reel

This is a hose guide. It is used by inserting it into the soil ground.
If you hook the hose and pull it, it will rotate and you can pull the hose smoothly.

[features]
-The corresponding hose outer diameter is within 18 mm.
-Print without support
-The bottom parts are designed so that the reel does not move easily
-Added a cap to prevent sand from getting into the rotating shaft
-The slope is provided so that the sand does not collect.

[What you need other than 3D printing]
-M8mm stainless steel screw bar, length is 200-300mm x1
-M8mm stainless nut x2
-M8mm stainless cap nut x1 (or normal stainless nut x2)
-M8mm stainless washer x3
-Stainless steel pipe with an id. 8.5 mm od. 9.5mm Length is 31 mm x1