T12 Soldering-Station Plate and Tip Holder

This Holder is made for a "Handskit T12 Soldering Station" which is a Clone of the KSGER T12 Soldering Station.
These STM32 T12 Soldering Stations are performing verry well with Open Source Custom Firmware.

The Base Plate will give the Soldering Station a snug fit and holds it in Place.
You can use it standalone or mount it with double sided foam Tape above a "Kaleep 8586 Rework Station"(or similiar) - thats what i do have here and for what i made it.

As Bonus i made a Tip Holder which can be screwed on the Base Plate on both Sides.
You will need to insert M3 Press-Nuts in the Side of the Base to screw the Holder(s) on.
I use a Soldering Iron on roughly 200°C for inserting the Press-Nuts in the printed ABS-Part.
-Please mind to file down a old Tip to easyily insert the Nut with it. Dont use a Solder Tip which you use for Soldering as the ABS-Fumes will destroy the Tip Coating,...

Done with FreeCAD V0.19 - CAD File is included.
Keep in Mind that i am no Pro on 3D CAD Design ;)