Scar for Lynx V2 Blaster

A scar remixed from https://www.thingiverse.com/thing:4790142
This scar is meant to only be used with a 40cm barrel on a lynxv2 blaster. It will work on other blasters with exposed barrels but you can save print time and material by just printing the original

Features:

• Centers itself to the rail1 piece, will not affect zeroing should you want to change barrels and/or springs
• Has a cutout for the takedown pin so it is guranteed to not shoot out your blaster
• Works for all, if not most, remixed shrouds of the original lynx v2 blaster
• Loose barrel fit to easily swap for different FPS. You can also maintain airseal all the way if you wrap a round of teflon or scotch tape around the barrel firsts

How to choose the scar to print
V4 - Works at almost every FPS mark at the cost of slight FPS loss
(Made in mind for 220-230fps)
V3 - For use around the 200fps mark
V2 - For use at 250fps and above (Drops performance alot at lower FPS limits)
V1 - For use at 150-180fps (rifling is minimal, FPS loss is near 0)