February 7, 2022
Description
This is based off my Superlite! hotend. It's currently untested but passed CAD tests.
The extruders are 35 apart. Each one is offset 17.5mm from the stock CR extruder mounting. This is to accommodate cooling and hopefully fit in the small overhangs of an Ender3. The extruders are also 18mm or so forward compared to stock. It uses 2 5015 blower fans for part cooling, more air=more better!
There's a part to use a single 60mm fan to cool the extruders as an option too.
The BLTouch sits 27mm in front of the nozzle and 17.5mm to the right of it.
See the original post linked above for more info! I will be printing and testing this soon.
Thank you!
License:
Creative Commons - Attribution - Non-Commercial
morganlowe
