LitterLocker Fashion Trashbag Adapter

This thing was designed as a trashbag adapter for the LitterLocker Fashion. You will need a 35liter trashbag for this to work, you may be able to use smaller once as long as the trashbag reaches tho the bottom of the LitterLocker.

Usage:
Getting the trashbag into the LitterLocker takes a little getting used to. I normally take the the trashbag and put most of it into the bottom department of the LitterLocker leaving enough of it at the top to clamp it into the adapter. After that you can use the LitterLocker as always.

To get a full trashbag out of the Litterlocker i like to take off the top part of the litterlocker and removing the adapter. Then i twist the top part of the trashbag and let it fall through the spring tensioned plastic part. afterwards i take of the top part of the LitterLocker leaving only the bottom part with the full trashbag on it.

Printing:
Print it laying down as shown in the screenshot, you should be able to use a bigger nozzle in order to speed up the print. No supports are needed