Why this print head?
- Compact and efficient
- Fits on Ender 2 Pro (not for elder Ender 2)
- Support E3D v6 and Volcano hotends
- Slightly print volume losses: 165x160 for Ender 2 Pro
- Easy to print - no supports needed
- Lightweight (aprox 250g without X carriage, printed from ABS)
- Support ADXL345 accelerometer for calibrate Input Shaper
- Optimized airflow for model cooling
BOM
- BMG gears kit
- E3D V6/Volcano hotend
- 40x40x10(20) axis fan for hotend
- Nema 14 36mm pankake stepper motor
- 1x 5015 turbo fans for model cooling
- 8x M3x4x5 hot melt insert nut
- 3x M3x8 round head screw
- 6x M3x10 round head screw
- 1x M3x12 round head screw
- 2x M3x20 round head screw
- 2x M3x25 round head screw
- ~40mm PTFE tube
Print settings
- For base and mount use any filament with ~80°C heat resistance (PETG, ABS, ASA, HIPS, PA, PP, PC, etc.)
- For fan ducts use any filament with ~100°C heat resistance (ABS, ASA, PA, PP, PC, etc.)
- Models are created for 0.4mm line width and any layer height. If you plan to use other values, check layer preview to find wrong pathes.
- Use 3+ perimeters and 30%+ infill for max rigidity of mount
- The feeder based on K3D Minifeeder v2.2 by Dmitriy Sorkin (https://k3d.tech/minifeeder/) and reinforced by me
Special thanks to DeltaDesignRus (https://www.thingiverse.com/deltadesignrus) for these awesome renders :D
License:
Creative Commons - Attribution
Citruzzzor
