Pflueger Reel Dust Cap

I lost the Dust Cap for one of my Pflueger Presidential spinning reels, so I designed a new one. It fits my PRESSP20 and PRESXTSP25 reels and should fit any size reel in either series.

The model is fully customizable in OnShape, with every dimension in a variable studio. Here is the link for the model. To edit the model, just sign up for a free account and make a copy.

The cap in my photos is a little crude because I printed it using a 0.6mm nozzle with a 0.15mm layer height. This was the smallest detail I could print and was just barely enough detail to print the threads. I would recommend using a 0.4mm or even 0.2mm nozzle with the smallest layer height possible make sure the threads are usable and to capture the detail in the knurling.