March 2, 2015
Description
I love surf fishing, but I can never get my bait out far enough, so I designed this fishing line servo release system for multirotors. Let your craft take out the bait, then activate the servo to drop the line.
It was designed to use a Tower Pro MG90S servo, but other micro servos would probably work.
You will need some sort of shaft (I used a 5mm steel shaft piece out of an old printer) and a way to hook it up to the servo. I just soldered a short piece of stiff wire to the shaft and ran it to the servo horn.
I printed with ABS set to 0.2mm layer, 50% infill, no supports, and it turned out fairly sturdy. I may do another with 100% infill to compare.
Happy Fishing!
https://www.youtube.com/watch?v=wE6zM02mYQY
https://www.youtube.com/watch?v=kY4JshU99gI
License:
Creative Commons - Attribution - Share Alike
wbegg
![#0178 [UPDATED] Automatic Paracord Clothesline Tensioner (spring loaded, for 4mm cord) preview image](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/962703/images/7574921_253a05d3-b794-48ef-9bfe-458d80461001_e08b1156-15dd-4fad-b664-246a109e7b5a/thumbs/cover/320x240/jpg/rl-20240819-012.jpg&w=640&h=640&output=webp&q=100&n=40&default=https://media.printables.com/media/prints/962703/images/7574921_253a05d3-b794-48ef-9bfe-458d80461001_e08b1156-15dd-4fad-b664-246a109e7b5a/rl-20240819-012.jpg "#0178 [UPDATED] Automatic Paracord Clothesline Tensioner (spring loaded, for 4mm cord) preview image")
