LiberNovo Omni - Seat Depth Mod - Backrest Fix

if you're using the seat depth mod to turn the bottom bar attachment around and reattach, you get more seat depth!
AND it sits slightly higher which is better for us tall folk!

Details here if you want more seat depth:
https://www.reddit.com/r/LiberNovo/comments/1qmmu8o/added_seat_depth_modification/

The problem:
After doing this mod, you'll notice that when you reattach the seat back top bar to the chair, the lumbar angle is more pronounced because the seat back is compressed and this is potentially uncomfortable.

The solution:
This is a 3d printable riser for the seat back attachment clip that corrects the seat backrest angle back to normal.
I'm 6'4 and now the seat depth and back is perfect for me.

Instructions:

1. Print all parts.
2. Unclip the plastic factory bar clip from the top bar and replace it with this riser.
3. Attach the left and right locking ends on either side of the riser.

It should all clip together and is completely reversable, no permanent chair modifications required.

Printed with:
30% infill
supports enabled
Brim recommended
PLA+ Light Grey - Bambu Lab filament