Chamber Heater Unit

🔥 Improve Prints with ABS, ASA, and Technical Materials

This Chamber heater helps maintain a stable temperature inside the print chamber, enhancing layer adhesion and reducing warping when printing technical materials such as ABS, ASA, Nylon, and PC.

⚙️ Main Features

✅ Compatible with Bambu Lab P1S/X1/X1C and other enclosed 3D printers (check available space for other brands)
✅ No modifications to the printer required, does not void the warranty
✅ Designed to be controlled via a smart WiFi plugs (recommended: TP-Link Tapo Smart Plug)

✅ I use Home Assistant to control everything. but isn't mandatory.
✅ Works with a temperature sensor for automated control (recommended: Tapo T310)
✅ Attaches with high-temperature adhesive tape, no screws or drilling required
✅ Dedicated space for a blower fan suggested 12v but possible with limitations with 5v (7515) and PTC heater (50w model, suggested 100w model)  checking the voltages and absorptions of transformers
✅ Compact and optimized design to avoid interference with the print bed movement

✅ Heats the chamber up to 60°C (140°F) for optimal printing conditions with technical materials. The enclosure must be fully sealed with no openings for optimal heating efficiency and 100w installed.

🛠️ Easy Installation

1️⃣ Print the mount using ABS, PA6 or another heat-resistant material.
2️⃣ Purchase the required components via the provided links.
3️⃣ Attach the mount using high-temperature adhesive tape.
4️⃣ Connect the heater and fan to a TP-Link Tapo Smart Plug for remote control.
5️⃣ Use the Tapo T310 temperature sensor to automate heating based on real-time chamber temperature.

6️⃣ Route the cables from the back of the printer for a cleaner and safer setup.

📌 Compatibility with Other Printers

• This mount is designed for Bambu Lab P1S/X1/X1C, but it can also be used on other enclosed 3D printers (Creality K1 Max, Voron, Prusa XL, etc.), as long as there is enough space for installation.
• It does not require any connection to the printer’s motherboard, making it 100% independent and safe.

🚀 Why Use It?

🔹 Improves print quality on technical materials
🔹 Better layer adhesion and reduced warping
🔹 Smart and automated control with a WiFi plug and temperature sensor
🔹 Easy to install and remove

⚡ Recommended Usage

🔥 Preheat the enclosure for at least 30-45 minutes before printing to ensure a stable temperature and optimal print quality.

Boost MeSe ti piace il mio lavoro puoi supportarmi Gratis!