P1s Buffer relocation bracket (For AMS Flipper)

Quick bracket i fabbed up to relocate the p1s Buffer unit from its inset location on the p1s up 32mm. This allows for the AMS PTFE tube to wrap down and keep inline with the bottom of the AMS flipper handles and to the Buffer unit and out again. it can be used without the flipper.

uses 2 additional m3x8 screws to mount to the p1s first. then you may re-use the buffer unit m3 screws to tap into the adapter. Adapter is not threaded for the buffer tube and is intended to be undersized to help with threading directly into the plastic.