Anova Sous Vide Stand

This is a 3D printable version of the Anova standard stand. Because I really liked their design, but didn't want to spend that much in such a simple geometry, I made my own!

It fits my Anova Precision Cooker perfectly, even with the screw support on, there is some wiggle room in general on the sides, but I made it so to avoid the stand getting stuck to it. Also, there is a bump on the bottom that fits underneath the Anova and "locks" it in place, so it doesn't slip forward. The stand overall seems very well balanced and the whole thing fells stable.

I printed in 0.2 mm thickness and a 10% infill to speed up the process, taking ~8 hours to print. Walls, top and bottom shells have 1.2 mm. The stand doesn't need to be extremely strong, so these settings feel just fine with PLA even.
In order to give it some surface finish, I sanded it down a little just to make most of the surface matte just like the anova plastic parts.